2) ULTRALITE Perlite Insulation Grade (IG) is not only a superior insulation but also:
a) Acts as permanent insulation which minimizes "winter heat" loss and "summer heat" gain providing
greater comfort and long-term energy savings.
b) Easy to install thus reduced labor cost.
c) 10% cheaper and effective as vermiculite insulation.
d) Provides fire safety and reduces insurance cost.
e) Effective noise and sound reduction, improves quality of buildings, etc.
3) APPLICATION
A. Loose-fill insulation for high Temparature (Building/Construction Application)
B. Loose fill insulation for low Temparature and Cryogenic Application
Liquefied gases having boiling point of as low as 425ºF have created a demand for storage facilities capable
of economically reducing evaporation losses and prevent erratic temperature change which may cause explosion.
A large majority of the vessels are of double construction and the annulus is filled with expanded perlite.
C. Moulded and Cast Insulation Form and Low Temperature
ULTRALITE PERLITE INSULATION GRADE (IG) is used as insulation cover on the surface of molten
metal to prevent excessive heat loss during delays in pouring; to top off ingots; to reduce piping and decrease
lamination. Althought thermal conductivity increase apprecialby above 1700ºF. It is also used in all sorts of
high temperature steam pipings, boilers, heated tanks, vaults, safes, etc., in cold pipings, in refrigeration, cold
storage, and liquified nitrogen (LNG) gas pipings and all other gas tanks.
|
